Wednesday, January 19, 2011

The firewood processors bench

The firewood processors hydraulic roller bench is powered by a AMR 250cc hydraulic motor from flowfit hydraulics. You can also see in the picture above is a hydraulic dual cross relief valve. This valve is adjustable and is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. I used this 
because the tractor i was using to run the firewood processor was putting out a bigger PSI than the hydraulic motor was rated for

firewood processor is sheeted with checker plate for safety

firewood processors pillow block bearings

firewood processors 250cc hydraulic motor

firewood processors conveyor rollers